Assistina TWIN
Oil service in record time
-
Oil service without waiting
Green light for added efficiency: With the new Assistina TWIN
waiting time during the oil service is a thing of the past.
It is the first reprocessing device to be equipped with two
process chambers that can be used alternately, thus allowing
non-stop loading.
Relaxed maintenance more effective than ever! -
Oil service in record time
The Assistina TWIN performs your instrument maintenance
quicker than ever before.
Through the innovative oil nebulization technology, W&H has
been able to reduce the maintenance process to a record
time of just 10 seconds.
For lightning quick and incomparably thorough results. -
Maximum oil service with minimal consumption
Thanks to the smart process monitoring, the Assistina TWIN
always performs the maintenance thoroughly and with minimal
consumption.
The Assistina TWIN Care Set does not need to be replaced
until after approximately 2,800 instruments. The maintenance
of your instruments can be performed not only reliably and
quickly, but also more cost-effectively than ever before.
-
1 Oil service without waiting
Oil service without waiting
Green light for added efficiency: With the new Assistina TWIN
waiting time during the oil service is a thing of the past.
It is the first reprocessing device to be equipped with two
process chambers that can be used alternately, thus allowing
non-stop loading.
Relaxed maintenance more effective than ever! -
2 Oil service in record time
Oil service in record time
The Assistina TWIN performs your instrument maintenance
quicker than ever before.
Through the innovative oil nebulization technology, W&H has
been able to reduce the maintenance process to a record
time of just 10 seconds.
For lightning quick and incomparably thorough results. -
3 Minimal consumption
Maximum oil service with minimal consumption
Thanks to the smart process monitoring, the Assistina TWIN
always performs the maintenance thoroughly and with minimal
consumption.
The Assistina TWIN Care Set does not need to be replaced
until after approximately 2,800 instruments. The maintenance
of your instruments can be performed not only reliably and
quickly, but also more cost-effectively than ever before.
-
Click on the Icon to place the Assistina Twin virtually in your reprocessing room and see for yourself how well it fits.Drag the mouse in any direction to view the product from all sides.
Open the website with your mobile phone and experience the Assistina Twin in your reprocessing room!Quick. Click. Check.
Oil service without waiting time
Green light for better sustainability: with the Assistina Twin, waiting times during lubrication are a thing of the past. It is the first processing device equipped with two alternately usable process chambers, thus enabling non-stop loading. Prepare your transmission instruments easily and more efficient than ever!
Runs like a charm
1 Assemble the instrument in chamber 1.
2 Close chamber 1 and start the process.
3 Assemble the second instrument and close chamber 2 as soon as the process in chamber 1 is complete.
4 Remove the instrument from chamber 1 and repeat steps 1 and 2.Oil service in record time
With the Assistina Twin, you can maintain your instruments more quickly than ever before. Thanks to the innovative oil nebulization technology, W&H has succeeded in decreasing the maintenance process to a record time of just 10 seconds – for a speedy and incomparably thorough maintenance result.
An innovative system
The oil is nebulized before being blasted through the instrument at high pressure. This removes soiling from the inside of the instrument even more effectively. Thanks to the fine mist, every single part of the gear is wetted without having to set the gear parts into motion. All aerosols are removed from the process chambers through active suction and an integrated HEPA filter.
Practical for every practice
The Assistina Twin can be tailored
to meet the individual needs of your dental practice. It can process up to 360 instruments per hour not just due to the innovative procedure with a short processing time, but also thanks to its ergonomic design and wide range of adaptorsGroundbreaking technology
Thorough and comprehensive lubrication of the gear parts (orange) and cleaning of the spray channels (green) owing to the innovative oil nebulization technology.
Assistina Twin MB-302
REF 30310000Contains:
› Air hose (2 m)
› Power supply unit
› Twin Care SetAssistina Twin MB302 + 1 Quick connector ISO + 1 Quick connector RM
REF 30310003Contains:
› Air hose (2 m)
› Power supply unit
› Twin Care Set
› 1 Quick connector ISO
› 1 Quick connector RM
Awarded!
Assistina Twin was awarded the German Design Award and the Good Design Award in 2019 as one of the product innovations in 2020. The high-quality product and communication design was assessed. The Assistina Twin is therefore considered one of the defining products in the international product and design landscape.
Download Area
FAQ
- How do you replace the TWIN Care Set?
- How often does the TWIN Care Set need to be replaced?
- How does the user know when the TWIN Care Set needs to be replaced?
- What does HEPA mean, and what is filtered out of the air?
- Why does the Assistina TWIN have a HEPA filter?
- What instrument adaptors are available for the Assistina TWIN?
- Why is there no rotational lubrication option in the Assistina TWIN?
Instructions for use
Find all languages of the Update Hygiene and Maintenance (EN ISO 17664:2017) in the Download Centre.
Downloads
Videos & Tutorials
-
System overview adaptor
Assistina Twin (MB-302) with Quick Connect
Step 1: Select the handpiece type
- Straight and contra-angle handpieces: require Quick ISO adaptor
- Turbine handpieces: require Quick RM adaptor
Step 2: For brand specific connections
- For brand specific connections, like Roto Quick, select the right adaptor suitable for you.
Adaptor Quick ISO
REF 06422600
Adaptor Quick RM
REF 06395100
- Straight and contra-angle handpieces: require Quick ISO adaptor
-
Assistina TWIN MB-302 Supply voltage: 100 – 240 V AC Permitted voltage fluctuation: ±10 % Nominal current: 0.2 – 0.4 A Frequency: 50 – 60 Hz Maximum power consumption: 18 VA Air consumption: approx. 40 Nl/min. Operating pressure: 5 – 10 bar
(controlled via an integrated, automatic pressure controller)Volume: 60 dB Dimensions (width x depth x height) 297 x 435 x 190 mm Weight: 3,8 kg Capacity: 200 ml W&H Activefluid cleaning solution, MC-302
200 ml W&H Service Oil F1, MD-302