W&H Impex
* Multiflex® is a registered trade mark of Kaltenbach & Voigt GmbH, Germany
** also with other coupling versions available
*** Contra-angle handpieces of the Synea Vision Short Edition can be used on micromotors with an ISO coupling length of 23 mm or less.
**** Add-on control MF-100: Currently not available in North America
-
Extra Durable: Experience the Value
![]()
-
“While using the W&H Synea Power Edition handpiece, I was able to remove a crown in roughly 30 seconds almost effortlessly. In the past, using other handpieces, it would take me between 3 to 5 minutes of cutting. A few minutes of time savings per procedure adds up. This handpiece is less noisy and since it’s faster, it’s less stressful for the patient and more effortless for the doctors’ hands. W&H has truly innovated with this handpiece!”
Dr. Stephanie A. Robertson-Cameron
Kansas (USA) -
Effortless Power: Experience the Difference.
“Let the handpiece do all the work with optimal gear ratio. Less manual hand pressure with increased torque creates an effortless feel.”
Dr. Bobbi Stanley, The Stanley Institute
North Carolina (USA) -
Quieter Operation: Hear the Difference.
“The Synea Power Edition decreases the noise level in the operatory and creates a less intimidating environment for patients.”
Studies show that 40 hours of weekly exposure to levels at 80 dB for adults/75 dB for children can lead to degrees of hearing loss.*
Dr. Robert Stanley, The Stanley Institute
North Carolina (USA)
Versatile: "This handpiece is built for the toughest challenges, however, it can also be utilized as a multi tool for many other applications."
Time Saver: “An innovation that increases throughput by allowing a long, tough procedure to be completed faster, more efficiently and more effectively.”
Robust Design for ROI: “Designed and built to last 20% longer than other handpieces. Allow this handpiece to do the toughest jobs and increase the ROI across all of your dental handpieces.”
Drs. Robert & Bobbi Stanley
The Stanley Institute (North Carolina, USA)
All good things come in threes
With the special Synea 900-series, W&H has designed three extra powerful speed-increasing transmission instruments.
The premium line of the Synea range – the Synea Vision – is complemented with the WK-900 LT, while the Synea Fusion portfolio is reinforced with the WG-900 LT (with light) and the WG-900 A (without light).Synea qualities at a glance
- Ceramic ball bearings for smooth operation with less vibration
- Monobloc design for better hygiene
- Heat Blocker technology that keeps the push button cool, to protect you and your patients from burns
- Compact glass rod for constant light quality and the optimal illumination of the treatment site (WK-900 LT / WG-900 LT)
- Scratch-Blocker coating for long-term value retention (WK-900 LT)
- 36-month warranty (WK-900 LT) and 24-month warranty for WG-900 LT/A)
extra tough for the removal of high-strength materials
extra precise with new head design for better bur guidance
extra easy bur changes with unique and distinctive black push-button design
Even rotary instruments designed for heavy-load applications show decreasing removal rate over time when cutting hard materials (1, 4). To keep up with cutting performance, rotary instruments need to be changed more frequently. Hence, you
will appreciate the newly designed black push-button of the Synea Power Edition. It makes the bur change noticeably easier as forces are better distributed.
extra solid chucking system with more than 20% more clamping force
With an unbelievable 20% increase in clamping force, the newly designed FG chucking system is made for heavy-load applications.
extra strong with more torque and better removal rate
extra durable with at least 20% extended lifetime
When cutting harder materials, conventional contra-angle handpieces are subject to considerable wear. Long downtimes and high maintenance costs are the result. In contrast, Synea Power Edition contra-angle handpieces are extra durable and feature an especially robust clamping system. They are less susceptible to mechanical failures and offer an incomparably longer service life of at least 20% compared to standard transmission instruments.
extra robust for less service costs
New head design and optimal ergonomics For better bur guidance the head is placed slightly higher. With the optimised shaft design, a secure grip and a perfect balance is ensured, especially in combination with the small electric motors from W&H.
Synea Power Edition Contra-angle Handpieces
![W&H Synea Vision Power Edition contra-angle WK-900 LT]( "W&H Synea Vision Power Edition contra-angle WK-900 LT")
WK-900 LT
Contra-angle handpiece 1:4, 3-fold spray, head size Ø 10,7 mm, press-button chuck system for FG burs Ø 1,6 mm
WK-900 LT
REF 30418000Synea Vision Power Edition
with light (compact glass rod)Indications
› Cutting of crowns and bridges
› Cavities and crown preparation
› Removal of fillings
![W&H Synea Vision Power Edition contra-angle WG-900 LT / A]( "W&H Synea Vision Power Edition contra-angle WG-900 LT / A")
WG-900 LT / A
Contra-angle handpiece 1:4, 3-fold spray, head size Ø 10,7 mm, press-button chuck system for FG burs Ø 1,6 mm
WG-900 LT
REF 30459000Synea Fusion Power Edition
with light (compact glass rod)WG-900 A
REF 30460000no light
Indications
› Cutting of crowns and bridges
› Cavities and crown preparation
› Removal of fillingsDownload Area
Instructions for use
Find all languages of the Update Hygiene and Maintenance (EN ISO 17664:2017) in the Download Centre.
Video Tutorials
-
-
Reliable, ergonomic and
outstanding qualityThe premium instrument line in the Synea series. Innovative and long service life guarantee excellent treatment results for restoration and prosthetics.
Your advantages at a glance
- Two head sizes for individual needs
- Optimum service life and quiet operation due to ceramic ball bearings and innovative gearing technology (WK-99 / WK-93)
-
Easy to clean, comprehensive protection
and long-term value retention thanks to new surface coating - Excellent grip and ergonomics with optimised shank profile and monobloc design
-
Compact glass rod for outstanding
illumination of the treatment site -
Durable instrument construction with
stainless-steel external parts - Easy change of instruments
-
Integrated maintenance-free spray filter
for top water quality - Thermo washer disinfectable and sterilizable
- 3 year warranty
Synea Vision Short Edition – the ultimate straight and contra-angle handpieces
Choose from the classic range of high
and slow-speeds.Your advantages at a glance
- Reduced amount of strength due to the reduction in weight and length
- Perfect balance with the new, ultra-short micromotor
- Two different head sizes for high-speeds
- Thermo washer disinfectable and sterilizable
- 36 months warranty
IndividualUnexpected access options, incomparable view and most power with perfect head size.
- 2 high-speed head sizes available (WK-99 LT / WK-93 LT*)
- Step-up and step-down ratios: 1:5/1:4.5, 1:1, 2:1, 8:1, handpiece
Scratch-resistant surfaceScratch-resistant surface
Easy to clean, comprehensive protection and retains high value with special scratch-resistant surface.
Optimum coolingOptimum cooling
Perfect cooling and cleaning of the treatment site with 5x spray.
Excellent preparation resultsExcellent preparation results
- Optimum service life and unexpected quietness during operation with ceramic ball bearings and innovative gearing technology (WK-93* / WK-99).
- Incomparable view and most power with perfect head size.
- Quiet and vibration-free operation with optimum drive bearings.
Versatile rangeVersatile range
The right straight or contra-angle handpiece for every application – in Synea quality!
25% lighter, 15% shorter25% lighter, 15% shorter
Synea Vision Short Edition with electric motor EM-12 LED*
The combination of Synea Vision Short Edition contra-angle handpieces with the EM-12 LED electric motor considerably reduces the amount of strength required.
Synea Vision standard contra-angle handpieces with EM-E8 LED electric motor
The perfect system for daily work in the practice. With instruments for all standard motors that are currently available on the market.
HeatBlockerHeatBlocker – protects against burns
The W&H HeatBlocker technology ensures a cool push button and minimises the risk of injury for your patients. The ceramic ball integrated in the head of the contra-angle handpiece reduces friction on the push button if it is pressed unintentionally during treatment. The heat development prevented in this way not only protects you, but also your patients from burns.
Synea Vision Power Edition Contra-angle Handpieces
![W&H Synea Vision Power Edition contra-angle WK-900 LT]( "W&H Synea Vision Power Edition contra-angle WK-900 LT")
WK-900 LT
Contra-angle handpiece 1:4, 3-fold spray,
head size Ø 10,7 mm, press-button chuck system, for FG burs Ø 1,6 mm, compact glass rodWK-900 LT
REF 30418000Synea Vision Power Edition
Indications
› Cutting of crowns and bridges
› Cavities and crown preparation
› Removal of fillingsSynea Vision Straight & Contra-angle Handpieces
![WK-99 LT]( "WK-99 LT")
WK-99 LT
Contra-angle handpiece 1:5, 5x spray,
head size Ø 9.5 mm, push-button chuck system, for FG burs Ø 1.6 mm, compact glass rodWK-99 LT
REF 30023000Synea Vision
WK-99 LT S*
REF 30215000Synea Vision Short Edition*
Indications
› Preparation of crown abutments
› Preparation of cavities
› Dental trepanning
› Resectioning
› Finishing
› Removal of fillings and metals
![WK-93 LT]( "WK-93 LT")
WK-93 LT
Contra-angle handpiece 1:4.5, 5x spray,
head size Ø 9.1 mm, push-button chuck system, for FG burs Ø 1.6 mm, compact glass rodWK-93 LT
REF 30024000Synea Vision
WK-93 LT S*
REF 30216000Synea Vision Short Edition*
Indications
› Preparation of crown abutments
› Preparation of cavities
› Dental trepanning
› Resectioning
› Finishing
› Removal of fillings and metals
![WK-56 LT]( "WK-56 LT")
WK-56 LT
Contra-angle handpiece 1:1, Single Spray,
head size Ø 9.5 mm, push-button chuck system, for contra-angle bur with Ø 2.35 mm, compact glass rodWK-56 LT
REF 30025000Synea Vision
WK-56 LT S*
REF 30217000Synea Vision Short Edition*
Indications
› Preparation of cavities
› Dental trepanning
› Resectioning
› Separating
› Finishing of cavity margins and fillings
![WK-66 LT]( "WK-66 LT")
WK-66 LT
Contra-angle handpiece 2:1, Single Spray,
head size Ø 9.5 mm, push-button chuck system, for contra-angle bur with Ø 2.35 mm, compact glass rodWK-66 LT
REF 30026000Synea Vision
WK-66 LT S*
REF 30218000Synea Vision Short Edition*
Indications
› Excavating
› Prations close to the pulp
› Finishing
![WK-86 LT]( "WK-86 LT")
WK-86 LT
Contra-angle handpiece 8:1, Single Spray,
head size Ø 9.5 mm, push-button chuck system, for contra-angle bur with Ø 2.35 mm, compact glass rodWK-86 LT
REF 30027000Synea Vision
Indications
› Excavating
› Preparations close to the pulp
› Root canal filling
› Cementing
![HK-43 LT]( "HK-43 LT")
HK-43 LT
Straight handpiece 1:1, Single Spray,
twist tension chuck system for handpiece
and contra-angle bur Ø 2.35 mm,
compact glass rodHK-43 LT
REF 30028000Synea Vision
Indications
› Preparing
› Separating
› Dental trepanning
› Resections in anterior area
› Basic technical procedures* Contra-angle handpieces WK-99 LT S, WK-93 LT S, WK-56 LT S, WK-66 LT S can only be operated on dental motors with an ISO coupling measuring no longer than 23 mm.
Download Area
Instructions for use
Find all languages of the Update Hygiene and Maintenance (EN ISO 17664:2017) in the Download Centre.
Video Tutorials
-
Synea Fusion – be assured with proven Synea quality at an outstanding price
Uncompromising user comfort with proven Synea quality and optimum service life.
Your advantages at a glance
- Long life span and quiet running with ceramic ball bearings for model WG-99
-
Optimum access, best view due to small
head-sizes - Safe cooling with Quattro Spray (4 port spray) for model WG-99
-
Monobloc design for optimum hygiene
and ergonomics - Compact glass rod for constant light quality
- Optimised design for secure grip and optimum hygiene
- Secure grip and easy bur changes
-
Integrated maintenance-free spray filter
for top water quality - Can be connected to all ISO motors
- Thermo washer disinfectable and sterilizable
- 2 year warranty
Good illuminationGood illumination
Compact glass rod for good illumination of the treatment site.
Optimal cooling from four sidesOptimal cooling from four sides
Continuous cooling with Quattro Spray.
Optimised grip profileOptimised grip profile
Optimised grip profile for secure grip andoptimum hygiene.
Special InstrumentsReciprocating Contra-angle Handpieces WG-67 & WG-69
Special reciprocating contra-angle handpieces for areas that are difficult to access.Heat blocker – protects against burns
HeatBlockerHeatBlocker – protects against burns
The W&H HeatBlocker technology ensures a cool push button and minimises the risk of injury for your patients. The ceramic ball integrated in the head of the contra-angle handpiece reduces friction on the push button if it is pressed unintentionally during treatment. The heat development prevented in this way not only protects you, but also your patients from burns.
Synea Fusion Power Edition Contra-angle Handpieces
![W&H Synea Fusion Power Edition contra-angle WG-900 LT / A]( "W&H Synea Fusion Power Edition contra-angle WG-900 LT / A")
WG-900 LT / A
Contra-angle handpiece 1:4, 3-fold spray, head size 10,7mm, press-button chuck system, for FG burs, 1,6mm
WG-900 LT
REF 30459000Synea Fusion Power Edition
with light (compact glass rod)WG-900 A
REF 30460000no light
Indications
› Cutting of crowns and bridges
› Cavities and crown preparation
› Removal of fillingsSynea Fusion Straight & Contra-angle Handpieces
![WG-99 LT / A]( "WG-99 LT / A")
WG-99 LT / A
Contra-angle handpiece 1:5, Quattro Spray,
head size Ø 9.5 mm, push-button chuck system, for FG-burs Ø 1.6 mmWG-99 LT
REF 30007000Synea Fusion
with light (compact glass rod)WG-99 A
REF 30008000no light
Indications
› Preparation of crown abutments
› Preparation of cavities
› Dental trepanning
› Resectioning
› Finishing
› Removal of fillings and metals
![WG-66 LT / A]( "WG-66 LT / A")
WG-66 LT / A
Contra-angle handpiece 2:1, Single Spray,
head size Ø 9.5 mm, push-button chuck system, for contra-angle bur with Ø 2.35 mmWG-66 LT
REF 30011000Synea Fusion
with light (compact glass rod)WG-66 A
REF 30012000no light
Indications
› Excavating
› Preparations close to the pulp
› Finishing
![WG-56 LT / A]( "WG-56 LT / A")
WG-56 LT / A
Contra-angle handpiece 1:1, Single Spray,
head size Ø 9.5 mm, push-button chuck system, for contra-angle bur with Ø 2.35 mmWG-56 LT
REF 30009000Synea Fusion
with light (compact glass rod)WG-56 A
REF 30010000no light
Indications
› Preparation of cavities
› Dental trepanning
› Resectioning
› Separating
› Finishing of cavity margins and fillings
![HG-43 A]( "HG-43 A")
HG-43 A
Straight handpiece 1:1, Single Spray,
twist tension chuck system for handpiece
and contra-angle bur with Ø 2.35 mmHG-43 A
REF 30013000Synea Fusion
no lightIndications
› Preparing
› Separating
› Dental trepanning
› Resections in anterior area
› Basic technical proceduresDownload Area
Instructions for use
Find all languages of the Update Hygiene and Maintenance (EN ISO 17664:2017) in the Download Centre.
Video Tutorials
Downloads
-
Synea Vision
Types: WK-900 LT
(Power Edition)WK-93 LT /
WK-93 LT S /
WK-99 LT /
WK-99 LT SWK-66 LT /
WK-66 LT S /
WK-86 LTWK-56 LT /
WK-56 LT SHK-43 LT Light:
(compact glass rod)yes Head size: Ø 10.7 mm Ø 9.1 / Ø 9.5 mm Ø 9.5 mm Ø 9.5 mm – Head height: 22.9 mm
(with bur 19 mm)21.2 mm / 21.6 mm
(with bur 19 mm)20 mm
(with bur 19 mm)20 mm
(with bur 19 mm)– Transmission/reduction: 1:4 1:4.5 / 1:5 2:1 / 8:1 1:1 1:1 Max. motor speed: 40,000 rpm 40,000 rpm 40,000 rpm 40,000 rpm 40,000 rpm Max. operating part diameter:
Max. length:2.5 mm
25 mm2 / 2.5 mm
21 / 25 mm34 mm 34 mm 34 mm Coupling: ISO 3964 ISO 3964 ISO 3964 ISO 3964 ISO 3964 Spray: 3-fold
(> 50 ml/min)5-fold
(> 50ml/min)1-fold
(> 50ml/min)1-fold
(> 50ml/min)1-fold
(> 50ml/min)Scratch-Blocker: yes Heat-Blocker: yes Synea Fusion
Types: WG-900 LT/
WG-900 A
(Power Edition)WG-99 LT /
WG-99 AWG-66 LT /
WG-66 AWG-56 LT /
WG-56 AHG-43 A Light:
(compact glass rod)LT: yes
A: noLT: yes
A: noLT: yes
A: noLT: yes
A: no
A: noHead size: Ø 10.7 mm Ø 9.5 mm Ø 9.5 mm Ø 9.5 mm – Head height: 22.9 mm
(with bur 19 mm)21.6 mm
(with bur 19 mm)20 mm
(with bur 19 mm)20 mm
(with bur 19 mm)– Transmission/reduction: 1:4 1:5 2:1 1:1 1:1 Max. motor speed: 40,000 rpm 40,000 rpm 40,000 rpm 40,000 rpm 40,000 rpm Max. operating part diameter:
Max. length:2.5 mm
25 mm2.5 mm
25 mm34 mm 34 mm 34 mm Coupling: ISO 3964 ISO 3964 ISO 3964 ISO 3964 ISO 3964 Spray: 3-fold
(> 50 ml/min)4-fold
(> 50ml/min)1-fold
(> 50ml/min)1-fold
(> 50ml/min)1-fold
(> 50ml/min)Scratch-Blocker: no Heat-Blocker: yes Reciprocating Contra-angle Handpiece
Types: WG-67 LT /
WG-67 ALight:
(compact glass rod)LT: yes
A: noTransmission/reduction: 2:1 Max. motor speed: 20,000 rpm Operating part (mm): stroke 1.1 mm for Dentatus tips Max. overall length (mm): determined by the files/tips available Coupling: ISO 3964
Spray: 1-fold
(> 50ml/min)
