Osmo

The best water treatment to supply multiple sterilizers simultaneously

High quality demineralized water guarantees consistent, optimal performance and extends the life of your sterilizer and of your instruments.

Sterilization, Hygiene & Maintenance

Sterilization, Hygiene & Maintenance

System Overview

Answer 3 questions to find the right Water Treatment Device for your demands!

Find the right Water Treatment Device for your demands.

1
2
3

How many sterilizers are installed?

How many cycles run per day on each sterilizer?

What is the water conductivity level?

Your product recommendation:

Osmo

Possible alternative product:

Your product recommendation:

Multidem

Possible alternative product:

Your product recommendation:

Distilled Water

Possible alternative product:

  • Water demineralization system Osmo

    Purified water for optimal results

    Osmo is able to produce up to 30 litres of demineralized water per hour and supply up to 6 devices simultaneously. The water storage tank supplied has an effective volume of 7 litres of demineralized water to provide higher amounts of purified water used for sterilization and daily activities, such as instrument rinsing.

    Advantages at a glance

    • Suitable for use with all types of sterilizers, up to 6 devices simultaneously
    • Flexible use in combination with the spray gun
    • Fast cartridge replacement without tools
    • Automatic water filling and direct draining
    • Optimized ion exchange resin and carbon filter cartridges
    • Cost effective solution both for regions with poor water quality and practices with high demand
    • The purified water complies with the relevant recommendations and regulations for the correct reprocessing of instruments
    • Consistently high water quality, no limescale deposits

    • Multiple devices

      Multiple devices

      Osmo is the perfect solution if you want to provide purified water to a large number of sterilizers* at the same time.

      › The system can be connected directly to one or more sterilizers simultaneously.

      › The convenient spray gun allows the manual filling of any sterilizer.




      * Not all models shown are available in North America.
      Check with your local W&H rep.

    • Filter replacement

      Filter replacement


      The screw-unscrew system makes filter replacement easier than ever.

      › To replace one of the two cartridges, turn it left.

      › Be sure to be aligned on the unlock symbol and pull it down.

      › Insert the new cartridge aligning the unlock symbol and turn it right to the lock position.

      Do you have more than one sterilizer? Osmo supplies multiple devices simultaneously.

      Connection to different sterilizer models

      //a.storyblok.com/f/45617/790b073aa1/osmo-connection-to-a-number-of-sterilizers-en.png

      Lexa models included
      * Not all models shown are available in North America. Check with your local W&H rep.

      Osmo

      Automatic filling

      Osmo
      REF 19721134

      Buy
    • Type:

      Osmo

      Water pressure (min./ max.):

      0.5-5 bar

      Water temperature (inlet):

      +5 °C ÷ 30 °C

      Water temperature (storage):

      +5 °C ÷ 35 °C
      Protect from sunlight or other sources of heat

      Water quality (output):

      0.5-5 µS/cm

      Produced water:

      30 l/h

      Electrical power supply:

      230 V AC, 50/60 Hz, 0.6 A
      115 V AC, 50/60 Hz, 1.2 A

      Weight with filter cartridges (empty storage tank):

      ~13 kg

      Weight of water storage tank (empty):

      ~2.5 kg

      Overall dimensions (w x h x d):

      520 x 370 x 130 mm

      Volume water storage tank:

      7l

      Backflow preventer according to EN1717:

      yes

      Quantity of produced water with conductibility < 15 µS *

      10,000 l